NEW MEMBERS - REGISTER HERE


Membership is FREE!
It is best to log in before posting. Anonymous posting is disabled.

Viewing 1 to 6 (6 Total)
reduced volume

linos

linos
Belgium

Total Posts: 4
Joined: April 5, 2016

Hallo,

Sometimes when i load a new style, en play that style, the volume of my kn7000 is suddenly reduced to half.

Is there anyone who nows why?

It never happens with build-in styles.

Thank you.

Tags: problem kn7000
Posted on May 13, 2016 at 10:10 PM
Display Messages: Threaded     Flat
5 Replies

linos

linos
Belgium

Total Posts: 4
Joined: April 5, 2016

Re: reduced volume

I now know wath the reason is, but i have no solution.

When i load a style in the sequencer the green light on the APC/sequencer volume setting, is extinguished.
When i begins to play its take a few seconds (or longer) and the green light turned on. This makes that the volume change.

What can i do to prevent this?

Thank you

Posted on May 17, 2016 at 8:53 PM

RMepstead

RMepstead
United Kingdom

Total Posts: 169
Joined: May 28, 2014

Re: reduced volume

I ALWAYS have the APC/Sequencer volume slide set to fully up/on...that way you don't get this intermittent problem. In my experience unless you do this you can experience sudden drops in volume in the middle of a song as well.

Posted on May 20, 2016 at 12:41 PM

jd5live

jd5live
United Kingdom

Total Posts: 360
Joined: June 8, 2014

Re: reduced volume

My thoughts were along the same lines , my vol slider is always set to max and then any changes are stored in panel memory anyway
Regards John.

Posted on May 20, 2016 at 4:40 PM

linos

linos
Belgium

Total Posts: 4
Joined: April 5, 2016

Re: reduced volume

Thanks for the solition.

Posted on May 20, 2016 at 4:45 PM

admin

admin
United Kingdom

Total Posts: 1085
Joined: February 2, 2014

Re: reduced volume

Hi Linos,

The second slider, for accompaniment sounds should ALWAYS be set to maximum, with the green light on. Unless you have a specific (unusual) reason to reduce it.

The rest of the keyboard gets balanced around the fact that this second slider is to remain at the maximum setting (normally).

You then increase the volume of your right 1, right 2 and left to suit. And of course, you can reduce the master volume as appropriate.

The Songs you are loading must have been saved with the slider at a lower volume. When this occurs, the light will be out when you load the Song. You'll have to re-save the Song with the accompaniment slider set to maximum. If the slider has been moved whilst the Song was being recorded then that new slider position will be recorded inside the Song. In that case, you'll need to Step Edit in the Sequencer (Ctrl Track) to find the position where the slider was moved and delete the control message.

Here's the section on Page 85 of the manual with some further explanation.



Best wishes,
Mike

Posted on May 21, 2016 at 6:40 PM